GENERAL FLOOR AREAS:
Kitchen, Breakfast, Foyer, Bathroom, Etc.
Cleaning:
Directions:
- For routine cleaning: Use 1/2 cup (4 oz.) of MK Neutral Klean for
every gallon of water.
- In heavier soiled areas: Use 1 cup (8 oz.) of MK Neutral Klean for
every gallon of water.
- No rinsing necessary.
Do Not Use Full Strength.
- To remove greasy dirt or for heavily soiled areas use MK Intensive Klean.
- To remove spots or stains from Polished or Natural Stone Surfaces use MK
Spot Removal Kit (removes stains caused by liquids, food, alcohol or pets).
* Recommended use twice weekly.
Intensive Cleaning (Stone floors and grout):
- Remove all loose debris from surface to be cleaned.
- Dilute 8 oz of MK Intensive Klean in one gallon of warm water.
- Mop floor with a string or sponge mop.
- Allow to stand on surface a few minutes.
- Scrub with brush.
- Rinse with fresh water.
* Recommended use weekly or as needed.
Grout Cleaning (Ceramic Tile or Unpolished Stone):
Do Not Use on Polished Marble.
- Remove all loose debris from surface to be cleaned.
- Spray on surface and let stand to penetrate and loosen dirt and grime. If heavily soiled, use a brush to scrub grout joints or porous
tile. Rinse well with water.
Regular Care
- Regular care and maintenance of natural stone grout and Masonry surfaces is recommended. Use MK Penetrating Sealer on floors every 12 to 18 months or as needed to maintain the natural
beauty of the surface and provide a layer of protection against dirt and stains.
* Recommended use as needed.
Sealing Stone, Grout and other Porous Surfaces:
- Clean surface to be sealed with MK Intensive Klean. Rinse thoroughly.
- Be sure that the surface is completely dry.
- Apply MK Penetrating Sealant with a lambs wool applicator or a clean terry
cloth, accurately following directions on product label.
* Recommended use twice per year.
