MK STRIP KLEAN®

A non-ammoniated heavy-duty stripper with fast-acting emulsifying agents that effectively remove sealer, wax finishes, coatings and epoxy grout haze.

USE ON:

INDOORS: Polished, Unpolished and Tumbled Marble, Granite, Travertine, Saturnia, Slate, Terrazzo, Ceramic Tile and Grout.

OUTDOORS: Coral Stone, Shellstone, Pavers, Cast Stone and Concrete Surfaces.

DIRECTIONS:

For sealer, wax finishes and coating removal: Dilute 1 part MK Strip Klean® (1 quart) to 3 parts hot water (3 quarts).

For epoxy grout haze and light stripping: Dilute 1 part MK Strip Klean® (1 quart to 4 parts hot water (1 gallon).

Apply solution liberally to floor and allow to soak for 5-10 minutes, keeping the floor wet. Scrub floor with a floor machine or a deck brush, then pick up the solution with a WetVac. Thoroughly wash floors using MK Neutral Klean for Floors® until all residues are removed. Allow floor area to dry.

To re-seal: Use MK Penetrating Sealer®. Follow the directions as outlined on the back of the product label.

CAUTION:

KEEP OUT OF REACH OF CHILDREN AND PETS. May be harmful if swallowed. Do not induce vomiting. Drink a large volume of water and call a physician immediately. In case of contact with eyes, repeatedly flush with water for up to 15 minutes. If contact with sensitive skin, wash with soap. Call physician if needed.